Air Tanks Plus

Air Tanks Plus

PCP Airgun equipment

Manufacturing, Distribution, and Online Sales

We have a few of the Skout EPOCH .30 Airguns In-stock and Ready To Ship

Brand: Air Tanks Plus

REGMAN 2.0

RegMan is an adjustable external pressure regulator that sits between your PCP fill adapter and the fill port on your PCP airgun.

Regulates Air Pressure

Turning the knob easily allows you to externally adjust (up or down) the pressure going into your PCP air gun. Once set, it holds a constant pressure.

Tune Pressure for Best Accuracy

Using the RegMan along with a chronograph you can experiment with different pressures and figure out what velocity works best for favorite projectile.

Bell Curve is GONE!

Say goodbye to the bell curve blues. Consistent pressure in the airgun's air reservoir ensures repeatable hammer strike force needed to open the valve. This ensures shot-to-shot consistency.

Save Air & Shoot Longer

Once you are tethered up to your air gun, you keep it connected until you are done with the shooting session. This means no stopping to fill the air gun or wasting air each time you bleed the system.

it's Red and Looks cool

And it matches the rest of our high-end stuff

Want to take it for a spin?

He turns on a dime and that is the size of the groups we like to see on paper at 50 yards

  • Thats with our guns, unfortunately not all PCP airguns are that accurate, so your mileage may very.

Easy to connect

No Tools Needed

1

Connect the Fill Adapter to your tank

2

Connect the Fill Adapter to the RegMan Input

3

Connect the Fill Whip to the RegMan Opuput

4

Connect the other end to your gun

And he weighs in at 2.3 lbs

Anything Else I need?

To connect this to a tank, and my PCP Air Gun?

There is nothing worse than getting excited and pulling the trigger on something, only to find out you don’t have everything on hand to make it work.ย  To connect the RegMan to your gun you are going to need a PCP fill adapter that connects to your tank.ย  This needs to have a bleed valve to remove all the pressure in the lines.ย  The RegMan is self-venting, however the process is a little more complicated vs just opening a bleed valve.ย  The other thing you will need is a male to female micro-bore fill whip that connects from the output of RegMan to your PCP air gun.

REGMAN 2.0 Introduction

Video

Play Video

Showing all 2 results